Oki ML1120 - Page 61

ML1120/ML1190 eco User’s Guide – Operating instructions > 61
Top feed
menu
Page length
control
Control the page
length of cut paper.
by MENU setting
by Actual page
length
Cut sheet
auto eject
Position
Select a printable
area at the bottom
of cut sheets of
paper in cut-paper
mode (the character
centre position).
6.35 mm (1/4 in)
12.70 mm(6/12 in)
14.82 mm (7/12 in)
TOF
Adjustment
(Cut Sheet)
Select an
adjustment value
for the reference
position in regard to
the TOF position of
cut-paper/
passbooks.
The position moves
to the rear of the
form by [+] and to
the top of the form
by [-] in 1/144 in
increments.
-20 – -1
0
+20 – +1
TOF (cut
sheet top of
form)
Select the reference
position for the TOF
position when
feeding cut-paper in
manual mode. (Up
to the mid-section
of characters in the
first line.)
2.12 mm (1/12 in)
4.23 mm (1/6 in)
6.35 mm (1/4 in)
8.47 mm (1/3 in)
10.58 mm (5/12 in)
12.7 mm (1/2 in)
14.82 mm (7/12 in)
16.93 mm (2/3 in)
19.05 mm (3/4 in)
21.17 mm (5/6 in)
23.28 mm (11/12 in)
25.4 mm (1 in)
27.52 mm
(13/12 in)
Use top of form
Cut sheet LF
adjustment
Adjust a line feed
amount in cut-
paper mode.
-14 – -1
0
+14 – +1
Set-up menu Graphics Select the printing
direction when
double-height print
data exists in a line.
Bi-directional
Uni-directional
Receive
buffer size
Select size of the
received buffer.
1line
32 K
64 K
128 K
MENU ITEM FUNCTION SETTING