Oki ML1190 User Manual

ML1120/ML1190 User’s Guide - Operating instructions > 54
MENU ITEM FUNCTION SETTING
Set-up menu 7 or 8 Bits Data
Word
Set the character code and
graphics data units to 7 or
8 bits.
(ML emulation only)
8
7
Operator panel
function
Select full or limited
operation.
Full operation
Limited operation
Reset inhibit Set whether to enable or
disable an initial command.
No
Yes
Print suppress
effective
Set whether to enable or
disable a print suppress
setup command.
Yes
No
Auto LF Select whether to perform
auto LF operation or not
upon receiving a CR code.
Yes
No
Auto CR Select whether to perform
auto CR operation upon
receiving a carriage return
command.
(IBM emulation only)
Yes
No
Print DEL Code Set whether 7FH code is
printed with DEL mark or
not.
(ML emulation only)
No
Yes
SI select pitch (10
CPI)
Set how to handle an SI
command received in 10
CPI mode.
(IBM emulation only)
15 CPI
17.1 CPI
SI select Pitch (12
CPI)
Set how to handle an SI
command received in 12
CPI mode.
(IBM emulation only)
12 CPI
20 CPI
Time out print Select valid or invalid.
Valid
Invalid
Auto Select Select whether to
automatically set Select
Mode after paper feeding
or not.
Yes
No
Host Interface Select interface settings.
Auto Interface
Parallel
USB
Serial

Oki ML1190 Specifications

General

Brand	Oki
Model	ML1190
Category	Printer
Language	English