Oki ML1190 - Page 55

ML1120/ML1190 User’s Guide - Operating instructions > 55
MENU ITEM FUNCTION SETTING
Set-up menu I/F Time out Select timeout time for auto
interfacing.
15 sec
30 sec
45 sec
1 min
2 min
3 min
4 min
5 min
ESC SI Pitch Set the contents of ESC SI
commands. (IBM emulation
only)
17.1 CPI
20 CPI
Print Style Set quiet printing and print
speed.
Normal
High Speed
Quiet
Select quiet mode Select the type of quiet
mode.
Mode 1
Mode 2
Reverse Feed
Control
Set reverse feeding.
TOF stop
TOF over
Centering position
(continuous)
Set the centering position
for the print head by the
number of characters of
10CPI ANK.
Default
Mode1
Mode2
Centering position
(cut sheet)
Set the centering position
for the print head by the
number of characters of
10CPI ANK.
Default
Mode1
Mode2
Power Saving Set whether to enable or
disable the power saving
function of the printer.
Enable
Disable
Power Save Time Select the time to enter the
Power Save mode.
5 min
10 min
15 min
30 min
60 min
Paper End Select whether a printer
status where no paper is
loaded is set to SEL or
DESEL.
On-line
Off-line
Print Direction
Command
Select the validity of a one-
way print setup command.
Valid
Invalid
Print Speed
Command
Select the validity of a print
speed setup command.
Valid
Invalid
Page Length
Command
Select the validity of a page
length command.
Valid
Invalid
LF Pitch
Command
Select the validity of a
linefeed pitch command.
Valid
Invalid
Font Command Select the validity of a font
command.
Valid
Invalid
Pitch Command Select the validity of a
character pitch command.
Valid
Invalid