Oki ML3320 User Manual

Operating instructions > 39
Set-up
cont.
Select Language
Set
Enable/disable the
combination of the code
page setting and the
language conversion.
Combined: Enable the
combination of the code
page and the language
conversion.
Code Page Only: Enable
the code page only and
suppress the language
conversion.
Changing the language
set replaces certain
standard symbols with
special characters used
in foreign languages.
Combined
Code Page Only
Power Save Time Sets the interval the
printer waits for more
data before it goes onto
the power save mode.
5 min
10 min
15 min
30 min
60 min
Time Out FF It will feed or eject
paper if no data is
received during a set
period of time.
Invalid
200ms
500ms
1 sec
Parallel
I/F
I-prime Select whether to print
or clear buffer contents
upon initialisation by
receiving I-PRIME.
Invalid
Buffer Print
Buffer Clear
Auto Feed XT
(Displayed only for
EPSON emulation)
If your system uses pin
14 of the parallel
interface to control
automatic line feed,
change the setting to
Valid.
Valid
Invalid
Bi-direction Set whether to return a
device ID or not in
accordance with
IEEE1284.
Enable
Disable
GROUP ITEM FUNCTION SETS
ML3320ECO/
ML3321ECO
ML3390ECO/
ML3391ECO

Oki ML3320 Specifications

General

Print Technology	Dot Matrix
Interface	Parallel, USB
Emulations	Epson FX, IBM ProPrinter
Resolution	240 x 216 dpi
Print Speed	435 cps
Noise Level	57 dB
Number of Pins	9-pin