Oki ML390 - Paper End (B) Lever

Page: 72
Service Guide ML390/391
Chapter 3 Maintenance & Disassembly
3.2.28 Paper End (B) Lever
NOTE:
The paper end lever guide is accessed from the bottom of the printer.
· Perform these procedures:
3.2.01
,3.2.02 , 3.2.04 , 3.2.05 , 3.2.06 , 3.2.20, 3.2.22 , 3.2.25
3.2.26 3,2.27 .
· While pushing on the six claws (1), detach the sensor cover (2). Four of the six claws are visible in the
illustration.
· Lift the paper end (B) lever (3) from the chassis.
P/N 53488901 Lever: Paper End (B) Both 90 RSPL A B C
B.2.05
, B.2.07
P/N 53488902 Lever: Paper End (B) Both 91 RSPL A B C
B.2.05
, B.2.07
P/N 53489101 Cover: Sensor All RSPL A B C
B.2.05
, B.2.07