Oki ML390 - Maintenance Tools

Page: 37
Service Guide ML390/391
Chapter 3 Maintenance & Disassembly
3.1.02 Maintenance Tools
The following tools are required to service the unit.
· #2 Phillips Screwdriver (with magnetic tip)
· Straight-slot Screwdriver
· Needle Nose Pliers (4 Inch)
· Rubber Band (used during removal of upper cover)
· Cutters
· Feeler Gauge
· Large, straightened Paper Clip (used during printhead gap adjustment)
· Digital Multimeter
· Shop Vacuum
· Cloth (soft and lint-free)
· Cotton Swabs
· All-purpose Cleaner
· Platen Cleaner
· Contact Kleen (P/N 51802301)
· Grease (Dow Corning BR2 or equivalent)
· Machine Oil
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)