(GROUP) (ITEM) (Current SETting)
· Press GROUP until you reach the desired group.
· Press ITEM until you access the desired item of a group.
· Press SET until you access the desired setting for an item.
· Press EXIT/MODE to record the changes and return to Print Mode. The MENU lamp will go out and the
SEL lamp will light.
4.10.05 Resetting to Factory Defaults
CAUTION:
Always print the menu before resetting to factory defaults. All customized information will be lost once the
menu has been reset.
The Menu will be reset to factory default settings. Refer to Chapter 2 of the Setup Guide or Appendix B of
the Reference Guide for these settings.
Menu
· Power OFF the printer.
· Press and hold the MODE and SELECT switches while powering ON the printer.
Menu and Top of Form
· Power OFF the printer.
· Press and hold the PARK and TOF/QUIET switches while powering ON the printer.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
To Next Page
Loading...
Need help?
General
