Oki ML690 - Page 48

ML690/ML691 User’s Guide 48
MENU SETTINGS TABLE
Group Item Function Settings (defaults are set in bold italic)
Rear Feed
(Push)
(cont.)
Page Length Specify the length of a continuous
form.
3” (76.2 mm), 3.25” (82.6 mm),
3.33” (84.7 mm), 3.5” (88.9 mm),
3.66” (993.1 mm), 4” (101.6 mm),
5” (127 mm), 5.5” (139.7 mm), 6”
(152.4 mm), 7” (177.8 mm), 8”
(203.2 mm), 8.5” (215.9 mm), 11”
(279.4 mm), 11.7” (296.3 mm),
12” (304.8 mm), 14” (355.6 mm),
17” (431.8 mm)
Initial Position Paper position (print or cut) when
printer is powered on.
Print position, Cut position
Cut Position Adjust Specify an adjustment value
for where to cut the end of a
continuous form.
–30 ~ –1, 0, +1 ~ +30
TOF Adjust Specify an adjustment value for
the reference position for the Top
of Form position of a continuous
form.
The position moves to the bottom
edge of the page (+) and to the
top edge of the page (–) in 1/180”
increments.
–30 ~ –1, 0, +1 ~ +30