Oki ML690 - Page 59

ML690/ML691 User’s Guide 59
MENU SETTINGS TABLE
Group Item Function Settings (defaults are set in bold italic)
Set-Up
(cont.)
Print Registration 1 Adjust the print starting position
on printing in the reverse
direction. The position moves
to the right or left in 1/720”
increments.
–10 ~ –1, 0, +1 ~ +10
Print Registration 2 Adjust the print starting position
on printing in the reverse
direction. The position moves
to the right or left in 1/720”
increments.
–10 ~ –1, 0, +1 ~ +10
Print Registration 3 Adjust the print starting position
on printing in the reverse
direction. The position moves
to the right or left in 1/720”
increments.
–10 ~ –1, 0, +1 ~ +10
Print Registration 4 Adjust the print starting position
on printing in the reverse
direction. The position moves
to the right or left in 1/720”
increments.
–10 ~ –1, 0, +1 ~ +10
Operator Panel Function
3
Set control panel operation.
Limited operation locks functions
on the control panel; only SEL,
LOAD/EJECT, and TEAR keys work.
Full Operation, Limited Operation