ML690/ML691 User’s Guide 60
MENU SETTINGS TABLE
Group Item Function Settings (defaults are set in bold italic)
Set-Up
(cont.)
Reset Inhibit To prevent a reset signal from
the computer from resetting the
printer to its defaults, set to Yes.
No, Yes
Print Suppress Effective Set whether to enable or disable a
print suppress setup command.
No, Yes
Auto LF Set whether to perform automatic
line feed operation or not upon
receiving a CR code. If your
printout is consistently double-
spaced, select No; if it overprints,
select Yes.
No, Yes
Auto CR
7
(only displayed
for IBM Emulation)
If you want the printer to
automatically add a carriage
return when a Line Feed is
received at the end of a line,
change the setting to “Yes.”
No, Yes
SI Select Pitch (10 cpi)
7
(only displayed for IBM
Emulation)
Sets the pitch to be engaged when
the printer control panel is set
for 10 cpi and the SI command is
received.
15 cpi, 17.1 cpi
SI Select Pitch (12 cpi)
7
(only displayed for IBM
Emulation)
Sets the pitch to be engaged when
the printer control panel is set
for 12 cpi and the SI command is
received.
12 cpi, 20 cpi
To Next Page
Loading...
