ML690/ML691 User’s Guide 61
MENU SETTINGS TABLE
Group Item Function Settings (defaults are set in bold italic)
Set-Up
(cont.)
Time Out Print If your software spends a long
time processing between portions
of data it feeds to the printer,
change the setting to Invalid to
keep your printer from dumping
the received data while it is
waiting for more.
Valid, Invalid
Auto Select Determines whether or not your
printer will automatically be
selected after you load in paper.
If you always use the same Top
of Form position, keep the default
setting of “Yes”. When set to “No”,
the printer will be deselected so
that you can set the Top of Form.
No, Yes
Host Interface Set which interface the printer
uses to receive printing
commands.
Auto Interface, Parallel, USB,
Optional
I/F Time Out Sets the length of time before the
interface switches to idle status
when no printing commands have
been received.
15 sec, 30 sec, 45, sec, 1 min, 2
min, 3 min, 4 min, 5 min
ESC SI Pitch
7
(only
displayed for IBM
Emulation)
Sets the character pitch used
when the ESC SI command is
received.
17.1 cpi, 20 cpi
To Next Page
Loading...
