Oki MPS2731mc - Page 82

44952001TH Rev.2
3-21
Oki Data CONFIDENTIAL
3. MFP INSTALLATION
(8) Attach the bracket and then tighten the screw.
(9) Plug the Ethernet/USB cable into the MFP.
(10) Attach the interface cover.
(11) Plug the AC cable into the MFP.
(12) Press the <SETTING> key on the control panel.
(13) Press
toselect[ViewInformation]andPress"OK".
(14) Press
toselect[System]andPress"OK".
(15) Check the value of [SD Memory] has [16GB].
Note! If the value of [SD Memory Card] has not increased, turn off the machine
and unplug the AC cable and Ethernet/USB cable, and then reinstall the SD
Memory Card.