Oki Data CONFIDENTIAL
43627911TH Rev. 3
237 /
Display on Operating Panel Meaning Measures
Shutting down The printer is in the shutdown
process.
Wait for a while.
Statistics Log Buffer is Full A memory space of an internal
hard disk for saving the number
of logs is not available.
Increase a memory space of a hard disk
by deleting unnecessary parts. Press the
ON-LINE switch to delete a displayed
error.
Statistics Log Buffer is Not
Available
A memory space of an internal
hard disk for saving the number
of logs is not available.
Install an internal hard disk (option).
Paper Multi Feed TRAY Overlapped paper are fed. Press the HELP button and follow the
instructions.
Job Offset Home Error An offset printing is not available
due to an occurance of the JOB
OFFSET function error.
The offset function is unavailable but
printing is available. Contact with a
customer center if an error still remains.
Power Save The printer is in the ENERGY
SAVING MODE.
The ENERGY SAVING MODE will be
canceled if printing starts.
Processing The printer is in data processing. Wait for a while.
Open Stacker
Face Up Stacker
Paper can not be fed due to a
closed face-up stacker.
Open a face-up stacker.
Checking Sectors A sector of a hard disk is in
checking.
Wait for a while.
Download Error Download error. Restart a printer. Re-start a printer.
Incompatible Toner
CCCC
Either a toner cartridge from
other companies is installed or
a correct toner cartridge has not
been installed.
Install a correct CCCC toner cartridge.
Collate Copy iii/jjj A collated printing is in process.
"I" copies of "j " copies are being
printed.
–
Collate Fail:Too Many Pages Printing is not available because
a lack of memory space occurs
during a collated printing.
Either install an extension memory or
reduce the number of specified pages.
Adjusting Temp A fusing temperature is in
adjusting.
Wait for a while.
Fuser Unit Near Life A life of fuser unit is about to end. Prepare a new fuser unit but
unnecessary to change.
Check Fuser Unit A fuser unit is installed uncollectly.
Reinstall it.
Reinstall it correctly.
Change Fuser Unit It is time to change a fuser unit
due to a life end of it.
Change to a new fuser unit.
Fuser Unit Life It is time to change a fuser unit
due to a life end of a fuser unit.
Change to a new fuser unit.
Data Present There is an unprinted data. Check out a data.
Check Data An error occurs during a reception
of a program data.
Check out a data.
Check Data
Program Data Write Error
An error of writing data occurs. Check out a data.
Check Data
Program Data Receive Error
<nnn>"
An error occurs during a reception
of data.
Check out a data.
Cancelling Job A data is in deleting.. Wait for a while.
Data Arrive A data is in receiving. Wait for a while.
Print Demo Page A DEMO page is in printing. Wait for a while.
To Next Page
Loading...
Need help?
General
