Oki Data CONFIDENTIAL
43627911TH Rev. 3
241 /
Display on Operating Panel Meaning Measures
Change Paper in MPTray
MEDIA_SIZE
MEDIA_TYPE
Press ONLINE Button
Please see HELP for details
Paper loaded onto a multi-
purpose tray is different from the
specified one.
Press the HELP button and follow the
instructions.
Memory Overflow Lack of memory space occurs. Press the ONLINE button. Either
increase a memory space or make a
printing data simple.
Print Configuration The printer is in printing a set-up
value.
Wait for a while.
Please see HELP for details Pressing the HELP button leads
to a solution for clearing out an
error.
Press the HELP button and follow the
instructions.
Invalid Data An invalid data is received. Press the ONLINE button.
Remove Excess Paper
TRAY
Reduce the number of paper
loaded onto a displayed tray.
Reduce the number of paper loaded
onto a displayed tray.
Remove Excess Paper
MPTray
Reduce the number of paper
loaded onto a multi-purpose tray.
Reduce the number of paper loaded
onto a multi-purpose tray.
Could Not Staple/Punch. Paper
Too Thick
Unable to staple due to thick-
paper.
Press the ONLINE button to clear out an
error.
Could Not Duplex. Paper Too
Thick
The printer is unable to duplex-
print due to thick-paper.
Press the ONLINE button to clear out an
error.
Could Not Staple. Too Much
Paper
Unable to staple due to too much
paper.
Press the ONLINE button to clear out an
error.
Paper Remain
TRAY
A paper remains around a
displayed cover.
Open a displayed cover and remove the
remaining paper.
Paper Size Error
TRAY
Different size of paper are fed
from a displayed tray. Open and
close a top cover to clear out an
error.
Press the HELP button and follow the
instructions.
Reset Paper
MPTray
A sheet of paper is not fed from
a multi-purpose tray. Reload a
sheet of paper.
Reload a sheet of paper.
Check Paper A different paper is Loaded. Press the HELP button and follow the
instructions.
Remove Paper
STACKER
Remove a printed paper left on a
displayed stacker.
Remove a printed paper left on a
displayed stacker.
Remove Paper
STACKER
Remove a printed paper left on a
displayed finisher.
Remove a printed paper left on a
displayed stacker of finisher.
Install Paper
TRAY
MEDIA_SIZE
Paper on a displayed tray runs
out.
Load paper on a displayed tray.
Install Paper
MPTray
MEDIA_SIZE
No paper on a multi-purpose
tray. Load a sheet of paper on a
displayed tray.
Load a sheet of paper on a multi-
purpose tray.
Install Paper
MPTray
MEDIA_SIZE
Press ONLINE Button
Manual feed printing of the multi-
purpose tray is in process.
Load a sheet of paper on a multi-
purpose tray and press the ONLINE
button to start printing.
Paper Thick Error
TRAY
Different thickness of paper is
detected on a displayed tray.
Press the HELP button and follow the
instructions.
Non Paper Sense Error A censor error of the paper-
thickness occurs.
If an error still remains after printing a
couple of pages, set a MEDIA WEIGHT
of a MENU to other than "AUTOMATIC"
or contact with a customer center.
To Next Page
Loading...
Need help?
General
