42
Using the cleaning sheet or a similar material, wipe off the adhesive
matter adhering to the Lower cutter.
Note: Although the edge of the Lower cutter is not as sharp as the edges of utility
knives generally used in offices, there is a risk of injury to a finger that is
moved while pressed directly against the edge of the cutter.
(5) After completing cleaning, reposition the roll paper, and close the
Top cover.
Note: Be careful when the printer is in cutter cleaning mode, because the Upper
cutter is exposed. After completing cleaning, reposition the roll paper, and
close the Top cover.
To Next Page
Loading...
