52
A-6.
Specifications of Reliability
(1) Printer life
Feed of 25 million lines (Specified thermal paper) or 5 years
(2) Head
Running life : 150km (Specified single-color thermal paper)
75km (Specified dual-color thermal paper)
Pulse life : 150 million pulses
(3) Cutter
- Partial cutting model
2,000,000 cuts (Specified thermal paper 75µm)
500,000 cuts (Specified thick thermal paper 150µm)
300,000 cuts (Specified label thermal paper)
- Partial/full cutting model
With only partial cutting used:
2,000,000 cuts (for paper with a specified thickness of 75 µm)
500,000 cuts (for paper with a specified thickness of 75 to 150 µm)
300,000 cuts (for the specified full-sheet label paper)
With only full cutting used:
1,000,000 cuts (for paper with a specified thickness of 75 µm)
500,000 cuts (for paper with a specified thickness of 75 to 150 µm)
* If both partial cutting and full cutting are used, the cutter life is different
from the above and depends on the conditions of use.
Note : Paper cutting performance may deteriorate faster with the use of label
paper because its adhesive matter adheres to the cutter blade. Clean the
cutter blade periodically.
To Next Page
Loading...
