7
2-3. Recommended Thermal Paper
Manufacturer Product
name
Quality characteristics Paper
thickness
Density
specification
Oji Paper Co.,
Ltd.
PD160R Monochrome thermal
paper (high-grade
preservation type)
75µm 100%
PD190R Monochrome thermal
paper (mid-grade
preservation type)
75µm 100%
Nippon Paper
Industries Co.,
Ltd.
HD75 Monochrome thermal
label paper (normal
type)
150µm 130%
Mitsubishi
Paper Mills
Limited
P220AE-1 Monochrome thermal
paper (normal type)
150µm 100%
PB670 Two-color thermal paper
(red/black: normal type)
75µm 105%
PB770 Two-color thermal paper
(blue/black: normal type)
75µm 100%
Note: A recommended type of paper must be used. If a type of paper other than a
recommended one is used, head damage, printing irregularities, or similar
problems may occur.
Note: To use two-color thermal paper, set the print color to two colors from the
printer setup menu or using the setup tool contained on the CD-ROM
provided with the printer.
(See "C-3 Setting Up the Printer" in Appendix C, "Special Modes.")
* By setting the appropriate property (use Color on the Graphics tab) for
printing with this printer driver, you can easily print in two-color mode
without having to change the printer setup.
Note: Ruled lines or characters containing fine lines (e.g. a serif typeface) tend to
have dull colors when they are printed on two-color thermal paper. For
printing on two-color thermal paper, a thick font (e.g., a sans serif font) is
recommended.
To Next Page
Loading...
Need help?
General
