Oki PT390 - Print Density

67
6. Select "PRINT DENSITY" as your option.
Press the FEED switch briefly (one second or less) four times to move to
"PRINT DENSITY."
Then, press and hold down the FEED switch for one second or longer to
accept the selection.
The printer prints the following when you accept the selection of "PRINT
DENSITY":
PRINT DENSITY
↑
PRINT COLOR
↑
PRINT WIDTH
↑
NV GRAPHIC MENORY
↑
USER NV MEMORY
Paper feed direction
RETURN TO SETUP MENU
RETURN TO UP
LOW POWER
MAX SPEED
BK DENSITY (2COLER)
PRINT DENSITY
PRINT COLOR
PRINT WIDTH
NV GRAPHIC MENORY
USER NV MEMORY
SELECTION ITEM
Paper feed direction
PRINT DENSITY 100%
PRINT DENSITY 130%
PRINT DENSITY 125%
PRINT DENSITY 120%
PRINT DENSITY 115%
PRINT DENSITY 110%
PRINT DENSITY 105%
PRINT DENSITY 100%
PRINT DENSITY 95%
PRINT DENSITY 90%
PRINT DENSITY 85%
PRINT DENSITY 80%
PRINT DENSITY 75%
PRINT DENSITY 70%
SELECTION ITEM