Oki PT390 - Page 73

72
3. Enter setup mode from special mode.
Press the FEED switch briefly (one second or less) twice to move to "SET UP."
Then, press and hold down the FEED switch for one second or longer to
accept the selection.
The printer prints the following when it enters setup mode:
SET UP
↑
HEX DUMP
↑
TEST PRINT
ITEM SELECTION :FEED switch pushed short.
ITEM DECSION :FEED switch pushed short.
SPECIAL MODE
Paper feed direction
END
SAMPLE PRINT
CUTTER CLEANING
PLATEN ROLLER CLEAING
SET UP
HEX DUMP
TEST PRINT
SELECTION ITEM
SETTING
ITEM SELECTION :FEED switch pushed short.
ITEM DECSION :FEED switch pushed short.
SETUP MODE
Paper feed direction
SAVE&END
DEFAULT SET
SETUP PRINT
SETTING
SELECTION ITEM