84
9. Select "RETURN TO SETUP MENU" as your option.
Press and hold down the FEED switch for one second or longer to accept the
selection.
The printer prints the following when you accept the selection of "RETURN
TO SETUP MENU":
10. Select "SAVE&END" as your option.
Press the FEED switch briefly (one second or less) until the item
"SAVE&END" is reached.
Then, press and hold down the FEED switch for one second or longer to
accept the selection.
The printer cuts the paper and exits from setup mode when you accept the
selection of "SAVE&END."
Note: If you turn off the printer power switch without first selecting
"SAVE&END," your setting will be lost.
- Verifying your setting
To verify your setting, execute a test print, referring to Section C-1.
The test printing prints a list of printer settings. Check the list,
and verify your setting.
To Next Page
Loading...
