Need help?Do you have a question about the OKPOS Optimus and is the answer not in the manual?
General| Brand | OKPOS |
|---|---|
| Model | Optimus |
| Category | Touch terminals |
| Language | English |
Crucial safety instructions for system use and personal safety.
Details copyright ownership and usage permissions for the manual.
Lists all items included in the product package.
Details the front and rear views, including ports and buttons.
Instructions for adjusting the tilt of the LCD screen for optimal viewing.
Step-by-step guide for connecting external devices and cables.
Procedures for installing optional hardware like card readers and VFDs.
Detailed steps for taking apart the system components.
Instructions for putting the system back together.
Guide on how to replace the M.2 Solid State Drive.
Procedure for replacing the system's RAM modules.
Steps to replace the CMOS battery on the main board.
Information about system drivers and installation files.
Instructions for calibrating the touch screen for accurate input.
Procedure to configure the card reader using the MRMSetter program.
Guide to accessing and configuring BIOS settings.
Procedure for recovering the hard disk to factory settings.
Details the main board layout and component identification.
Instructions for configuring jumpers, including CMOS clear.
Detailed pin assignment and connection diagram for the LVDS cable.
Pin assignments for COM1, COM2, COM3, and COM4 cables.
General technical specifications for the Optimus system.
Detailed specifications of the system's main board components.
To Next Page
