OKPOS Optimus - Setting up the VFD

Application Programs
|
Setting Up the VFD 44
Setting Up the VFD
To setup the VFD, please follow these steps:
1.
After powering on the system, press [Del] to enter the System Setup screen.
2.
Go to the Advanced menu.
3.
Select Super IO Conguration.
4.
Select Serial Port 3 Conguration.
Aptio Setup Utility - Copyright (C) 2017 American Megatrands, Inc.
Advanced
Super IO Configuration
Super IO Chip
▶ SerialPort1Configuration
▶ SerialPort2Configuration
▶ SerialPort3Configuration
▶ SerialPort4Configuration
▶ SerialPort5Configuration
▶ SerialPort6Configuration
SetParametersofSerialPort3
🠖🠔
: Select Screen
🠕🠗
: Select Item
Enter : Select
+/- : Change Opt.
F1 : General Help
F2:PreviousValues
F9 : Optimized Defaults
F10 : Save & Exit
F12:PrintScreen
ESC : Exit
Version2.17.1246.Copyright(C)2017AmericanMegatrands,Inc.