■ The first file saves the complete configuration of the MX 43 and is called
config_JJMMAA_HH_MM.cfg. To view or download this file, set the switch
(Figure 10, ref. D) at position 2. See paragraph Transferring configuration
to the MX 43 on page 20.
■ A second file saves the MX 43 firmware and is called firmware_MX
43_X_xx.bin. To view or download this file, set the switch (Figure 10, ref.
D) on position 4. See paragraph Firmware Upload on page 21.
To Next Page
Loading...