2HA/2HB
1-4-24
(11) The leading edge of the image is consistently misaligned with the original.
(12) The leading edge of the image is sporadically misaligned with the original.
(13) Paper creases.
(14) Offset occurs.
Copy example Causes Check procedures/corrective measures
Misadjusted leading edge registration. Readjust the leading edge registration (see page 1-3-12).
Misadjusted scanner leading edge
registration.
Readjust the scanner leading edge registration (see page 1-
3-19).
Copy example Causes Check procedures/corrective measures
Paper feed clutch, MP paper feed
clutch or registration motor installed
or operating incorrectly.
Check the installation position and operation of the paper
feed clutch, MP paper feed clutch and registration motor. If
any of them operates incorrectly, replace it.
Copy example Causes Check procedures/corrective measures
Paper curled. Check the paper storage conditions.
Paper damp. Check the paper storage conditions.
Defective pressure springs. Replace the pressure springs.
Defective separation. Check the drum separation claws and heat roller separation
claws.
Dirty separation electrode. Clean the separation electrode.
Copy example Causes Check procedures/corrective measures
Defective cleaning blade. Replace the drum unit (see page 1-5-23).
Defective fuser section. Check the heat roller and press roller.
To Next Page
Loading...
Need help?
General