Olivetti d-Copia 2000 Service Manual

2HA/2HB
1-3-61
(2) Job accounting
Job accounting on/off setting
1. Select [01.JobAccounting] and press the OK key.
2. Select [ON] or [OFF] and press the OK key.
Department ID code registration
1. Select [02.Register code] and press the OK key.
2. Enter a department ID code using the numeric keys
and press the OK key.
Setting range: 0 to 99999999
Deleting department ID codes
1. Select [03.Delete code] and press the OK key.
2. Enter the department ID code to be deleted using
the numeric keys
3. Select [YES] or [NO] and press the OK key.
Clearing the job accounting count
1. Select [04.Count Clear] and press the OK key.
2. Select [YES] or [NO] and press the OK key.
Outputting the job accounting list
1. Select [05.Print list] and press the OK key. If A4/11"
x 8
1/2" paper is present, the list is automatically
printed out. Otherwise, select the paper source and
press the OK key.
(3) Default setting
User status report
Prints the details of the default settings.
1. Select [01.Copy Status] and press the OK key. If
A4/11" x 8
1/2" paper is present, the list is automati-
cally printed out.
Otherwise, select the paper source and press the
OK key.
Message language
Selects the language displayed on the message dis-
play.
1. Select [02.Language] and press the OK key.
2. Select the language and press the OK key.
Original image quality
Selects the image quality at power-on.
1. Select [03.Image Quality] and press the OK key.
2. Select [text + ph Dens.], [Photo Density] or [Text
Density] and press the OK key.
Initial density
Selects the exposure mode at power-on.
1. Select [04.Initial Dens.] and press the OK key.
2. Select [Manual] or [Auto] and press the OK key.
EcoPront
Selects the EcoPrint mode at power-on.
1. Select [05.EcoPrint] and press the OK key.
2. Select [On] or [Off] and press the OK key.
Exposure steps
Sets the number of exposure steps for the manual
exposure mode.
1. Select [06.Density steps] and press the OK key.
2. Select [1 step] or [0.5 step] and press the OK key.
Auto exposure adjustment
Adjusts the exposure for the auto exposure mode.
1. Select [07.Auto Density] and press the OK key.
2. Select the setting and press the OK key.
Setting range: 1 (lightest) to 7 (darkest)
Text + photo mode exposure adjustment
Adjusts the exposure to be used when text and photo
original is selected for the image mode.
1. Select [08.Text+Ph Dens.] and press the OK key.
2. Select the setting and press the OK key.
Setting range: 1 (lightest) to 7 (darkest)

Olivetti d-Copia 2000 Specifications

General

Brand	Olivetti
Model	d-Copia 2000
Category	Copier
Language	English