2HA/2HB
1-3-5
(3) Contents of maintenance mode items
Maintenance
item No.
Description
U000
Outputting an own-status report
Description
Outputs lists of the current settings of the maintenance items, and paper jam and service call occurrences.
Purpose
To check the current setting of the maintenance items, or paper jam or service call occurrences. Before initial-
izing the backup RAM, output a list of the current settings of the maintenance items to reenter the settings
after initialization or replacement.
Method
1. Press the start key.
2. Select the item to be output using the exposure adjustment keys.
3. Press the start key. A list is output.
When A4/11" x 8
1/2" paper is available, a report of this size is output. If not, specify the paper feed loca-
tion.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
U001
Exiting the maintenance mode
Description
Exits the maintenance mode and returns to the normal copy mode.
Purpose
To exit the maintenance mode.
Method
Press the start key. The normal copy mode is entered.
U002
Setting the factory default data
Description
Restores the machine conditions to the factory default settings.
Purpose
To move the mirror frame of the scanner to the position for transport (position in which the
frame can be fixed).
Method
1. Press the start key.
2. Select "on" using the zoom +/- keys.
3. Press the start key.The mirror frame of the scanner returns to the position for transport.
Completion
The power switch turns off.
Display Output list
d-L List of the current settings of the maintenance modes
J-L List of the paper jam occurrences
C-L List of the service call occurrences
To Next Page
Loading...
Need help?
General