2HA/2HB
1-3-4
Mode setting U342 Setting the ejection restriction On
U343 Switching between duplex/simplex copy mode Simplex copy
U344 Setting preheat/energy saver mode ENERGY STAR
U345 Setting the value for maintenance due indication -
Image
processing
U402 Adjusting margins of image printing 3.0/3.0/4.0
U403 Adjusting margins for scanning an original on the contact
glass
2.0/3.0/2.0/2.0
U404 Adjusting margins for scanning an original from the DP 2.0/3.0/2.0/2.0
U407 Adjusting the leading edge registration for memory image
printing
0.0
Other U901 Checking/clearing copy counts by paper feed locations -
U903 Checking/clearing the paper jam counts -
U904 Checking/clearing the service call counts -
U905 Checking/clearing counts by the DP -
U908 Checking the total count -
U910 Clearing the black ratio data -
U911 Checking/clearing copy counts by paper size -
U920 Checking the copy counts
U927 Clearing the all copy counts and machine life counts -
U928 Checking the machine life counts -
U941 Setting the default magnification ratio of the default cassette 100%
U942 Setting of amount of slack for feeding from DP 0/0
U955 Setting operation panel type 0/0
U990 Checking/clearing the time for the exposure lamp to light -
U991 Checking the scanner count -
U993 Outputting a VTC-PG pattern -
Section
Item
No.
Content of maintenance item
Initial
setting*
*Initial setting for executing maintenance item U020
To Next Page
Loading...
Need help?
General