Olivetti d-Copia 2000 Service Manual

2HA/2HB
2-4-7
Section
Maintenance
part/location
Method Maintenance cycle Points and cautions Page
Developing
section
Developing unit
Check or replace - Replace if the problem occurs. P.1-5-26
Section
Maintenance
part/location
Method Maintenance cycle Points and cautions Page
Drum section Drum unit
Check or replace Every 150,000 counts Replace if the problem occurs. P.1-5-23
Section
Maintenance
part/location
Method Maintenance cycle Points and cautions Page
Fuser
section
Fuser unit
Check or replace - Replace if the problem occurs. P.1-5-28
Heat roller Clean
Every 150,000 counts Clean with alcohol or a dry cloth. P.1-5-33
Press roller Clean
Every 150,000 counts Clean with alcohol or a dry cloth. P.1-5-30
Heat roller separation
claw
Clean or replace Every 150,000 counts Clean with alcohol. Replace if
it is being lacking, deformed
or rubbing.
P.1-5-32
Section
Maintenance
part/location
Method Maintenance cycle Points and cautions Page
Exit section Exit roller
Check or clean - Clean with alcohol.
Exit pulley Check or clean - Clean with alcohol.
Switchback roller Check or clean - Clean with alcohol.
Switchback pulley Check or clean - Clean with alcohol.
Section
Maintenance
part/location
Method Maintenance cycle Points and cautions Page
Covers Covers Clean Every service
Clean with alcohol or a dry cloth.
Section
Maintenance
part/location
Method Maintenance cycle Points and cautions Page
Other Image quality Check and adjust Every service

Olivetti d-Copia 2000 Specifications

General

Brand	Olivetti
Model	d-Copia 2000
Category	Copier
Language	English