CONNECTING YOUR PRINTER
Your
printer has
an
operator's guide that explains how
to
unpack and
connect
it.
The guide also contains instructions for the setting of
necessary switches.
After
you
set
up
your printer,
we
suggest
you
place the operator's guide
in
this manual. This manual will then become a complete installation
document for your system.
DISKETTE DRIVE PROTECTION CARDS
Open
the diskette drive cover(s) and remove the diskette drive protec-
tion
card(s). A diskette drive protection card protects the drive from
damage while the system is
in
transit.
CONNECTING THE SYSTEM
TO
A POWER OUTLET
Before
doing anything else, ENSURE
THAT
THE
VOLTAGE
AND
FRE-
QUENCY OF THE POWER OUTLET ARE THE SAME
AS
THOSE
SPECIFIED
ON
THE STICKER AFFIXED
TO
THE BACK PANEL OF
THE
SYSTEM.
1.
Make sure that the ON/OFF switch
is
in
the OFF position (see
Figure
2-6)
2.
Insert the female plug of the
AC
power cable into the power input
socket
on
the back of the system (see Figure
2-2).
3.
Connect the
AC
power cable
to
the power outlet
you
have selected.
2-8
INSTALLATION
AND
OPERATIONS
GUIDE
To Next Page
Loading...
