ENDING
AN
ENTRY
While
you
are typing
on
the system keyboard, the information
is
not
being transferred to the system's memory.
To
transfer information
entered via the keyboard, to the system's memory, press the carriage
return
key.
The carriage return
key
is the angled-arrow
key
on the right
of
the alphanumeric section of the keyboard.
For
the rest of this guide,
this
key
will
be
referred to
as
the
CR
key.
The
information to
be
transferred to the system's memory is called
an
entry.
An
entry can
be
an
item of data, a program statement, or a com-
mand.
Whatever the nature of the entry, the system will not act
on
it
until the
CR
key
has been pressed.
ENTERING UPPERCASE CHARACTERS
To
enter uppercase characters:
•
for
keyboard 1 press either of the broad vertical arrows while enter-
ing
the characters to be set
in
uppercase
•
for
keyboard
2,
press either of the
SHIFT
keys while entering the
character(s)
to
be
set
in
uppercase
From
now on, within this manual, these keys will
be
referred to
as
SHIFT
keys.
To
lock the alphanumeric keyboard
in
uppercase mode, use the
CAPS
LOCK
key
. While the keyboard
is
locked
in
uppercase a lowercase
character can only
be
typed by pressing the
SHIFT
key
with the
re-
quired character
key
.
To
return to normal keyboard mode, press
CAPS
LOCK
4-4
INSTALLATION
AND
OPERATIONS
GUIDE
To Next Page
Loading...
