The backspace key is the rightmost key on the top row
of
the
alphanumeric section of the keyboard. Any characters between the start
of
the backspace operation, including the character you want
to
change.
will
be
deleted Having corrected the error(s), complete the entry and
press
CR
STOPPING A
COMMAND
Sometimes you will want to stop the execution of a command before
its
normal conclusion, and enter another command. A common exam-
ple
is
the stopping of a long listing of the files stored on a disk - once
you
have spotted the file you are searching
for.
To
stop the execution of a command, first press the
CTRL
key.
With
the
CTRL
key held down, press the
BREAK
key.
When both keys
are
released, the execution of the command will terminate, and the
system will be ready
to
accept another command.
Note:
On
keyboard
1,
the
BREAK
key appears with
SCROLL
LOCK
written on the top of the key and
BREAK
written on the front
of
the
key
.
AUTOMATI<;;
REPEAT FEATURE
If
a
key
is
held down, the associated character or function is repeated
for
as
long
as
the
key
is
pressed. This feature also operates when cer-
tain
key
combinations are used.
The automatic repeat feature works with almost all the the keys on ti'ie
keyboard, but there are a few exceptions. With certain keys, for exam-
ple
the
SHIFT
key
, the automatic repeat feature would serve no
logical purpose.
INSTALLATION
AND
OPERATIONS
GUIDE
To Next Page
Loading...
