Olivetti PR 4 - Page 69

Epson TM-U950 Commands 4-33
GS E n
Select print speed and head energizing time
Hexadecimal code: 1D 45 n
Range:
n = 0-255
Selects the print speed and print head energizing time (print mode), using
n
as follows:
Bit Off/On Hex Decimal Function
0 Off 00 0 Head energizing time: Copy
On 01 1 Head energizing time: Normal
1-3 - - - Undefined.
4 Off 00 0 Printing speed: HIGH
On 10 16 Printing speed: LOW
5-7 - - - Undefined.
Notes:
- This command is available only when input at the beginning of the line.
- The printer processes n = <***0***0>B as n = <***0***1>B.
- The setting is for paper selected by ESC c 0.
n Speed Print Head
Default mode
Paper roll Slip
1 High Normal Selectable by SETUP
16 Low Copy Default
17 Low Normal Selectable by SETUP
Default:
Paper roll:
n
=1 or 17, depending on the SETUP
Slip:
n
= 16
References:
ESC c 0
GS I n
Transmit printer ID
Hexadecimal code: 1D 49 n
Range:
n = 1-3; 49-51
Transmits the printer ID specified by
n
as follows:
n Printer ID Specification ID (hexadecimal)
1, 49 Printer model ID TM-U950 09H
2, 50 Type ID See table below
3, 51 ROM version ID ROM version See the notes below