Olympia CM 721 - Machine view

5/621/6400 (04) Machine view
11
■ Key-operated switch
The key-operated switch is the operational center of the cash register.
Various keys are available which enable the different functions to be used.
The OP key enables the user to make registrations and print reports without clearing
the memory.
The OW key enables the user to make registrations and print reports with/without
clearing the memory and program the cash register.
The OWP key enables the user to make registrations and print reports with/without
clearing the memory and program the cash register. It is also possible to activate
Training mode.
L
R
X
Z
P
T
Significance of the switch positions:
L = Power supply is switched off.
Each key can be turned to this position.
R = Sales transactions can be registered
(refer to Chapter „Operation“).
Each key can be turned to this position.
X = Reports can be printed without deleting the memory
contents (refer to Chapter „Reports“).
Each key can be turned to this position.
Z = Reports can be printed with memory contents deletion
(refer to Chapter „Reports“).
The OW and OWP keys can be turned to this position.
P = Programming level
Used to program the system flags, departments, items,
prices, etc.
The OW and OWP keys can be turned to this position.
T = Training mode
Used to carry out transactions without storing the result
(refer to Chapter „Operation“ / „Activate Training Mode“).
The OWP key can be turned to this position.