77
5
Playback
Erasing pictures
Single-frame erase
This function erases the picture that is displayed on the monitor.
1 Press .
• The monitor turns on.
2 Use the arrow pad to display the picture
you want to erase.
~
“Viewing still pictures” (P. 67)
3 Press .
• The top menu is displayed.
4 Press ñ to select .
5 Press Ññ to select YES, then press
.
• The picture is erased and the menu is closed.
• You cannot erase pictures that are protected. Cancel the protection
before erasing such pictures.
• Once erased, pictures cannot be restored. Check each picture
before erasing to avoid accidentally erasing pictures you want to
keep.
~ “Protecting pictures” (P. 76)
Recorded pictures can be erased. There are two types of erase: Single-
frame erase, which erases only the picture that is displayed on the monitor,
and all-frame erase, which erases all the pictures on the card.
Arrow pad (ÑñÉí)
To Next Page
Loading...
Need help?
General
