92
6
Useful functions
VIDEO OUT - Video output selection
You can select NTSC or PAL according to your TV’s video signal type. Set
the video output before connecting the video cable to the camera. If you
use the wrong video signal type, you will not be able to play back the
recorded pictures properly on your TV. You can change the NTSC/PAL
setting in either the shooting mode or the playback mode.
1 In the top menu, select MODE MENU T
SETUP T VIDEO OUT T NTSC or PAL,
and press .
~
“How to use the mode menu” (P. 30)
• Press again to exit the menu.
• The factory default setting varies depending on
the area where you purchased this camera.
TIPS
• TV video signal types & main regions
Check the video signal type before using the camera.
NTSC : Japan, Taiwan, Korea, North America
PAL : European countries, China
• NTSC (National Television Systems Committee) / PAL (Phase
Alternating Line)
Television formats.
Arrow pad (ÑñÉí)
To Next Page
Loading...
Need help?
General
