111
Chapter 5
1
In the top menu, select MODE MENU T CAMERA T PANORAMA.
2
Press í.
● The PANORAMA mode is set.
3
Press the arrow pad to choose at which edge (top/bottom/right/left)
you want to connect images.
● The direction is displayed.
4
Make sure that the edges of images overlap, then take your pictures.
● Focus, exposure and white balance are fixed to those set by the first
picture. Do not select an extremely bright subject (such as the sun) for
the first picture.
● Do not adjust the zoom after the first picture. Pictures with differently
sized images cannot be connected.
● Panorama shooting is possible for up to 10 pictures.
Panorama shooting
You can take advantage of panorama shooting with Olympus CAMEDIA-
brand SmartMedia cards. (Non-Olympus cards do not support this feature.)
Panorama shooting lets you connect images with overlapping edges into a
single panoramic image, using the CAMEDIA Master software that comes
with the camera.
For connecting pictures from left to right. For connecting pictures from bottom to top.
Shutter
button
Decide the composition of each picture so that the left (right for connecting
pictures from right to left) edge of the new picture and the right (left for
connecting pictures from right to left) edge of the previous picture overlap
exactly.
Shutter
button
~ Continued on next page
To Next Page
Loading...
Need help?
General
