118
Chapter 6
ISO Sensitivity
The higher the ISO value, the greater the camera’s light sensitivity and the
better its ability to shoot in low-light conditions. However, higher values also
produce more “noise” in the resulting images.
In the top menu, select MODE MENU T CAMERA T ISO, choose the
best one for your shooting conditions from among AUTO, 100, 200 and
400, then press to complete the setting. To start shooting, press
again.
AUTO : Sensitivity is automatically adjusted according to the lighting
conditions and the subject brightness.
100/200/400 : 100 is best when you want to shoot clear, sharp images in
daylight. With a higher ISO setting, you can use faster shutter
speeds with the same amount of light.
Setting limitations and Default settings (ISO sensitivity)
The setting for the ISO sensitivity differs depending on the shooting mode
concerned as shown below.
Mode dial
(Mode menu)
P
A/S/M/
Setting limitation
(–: Not available)
Factory default setting
Any of the 4 ISO sensitivities
are available.
S-Prg
–
● No selection other than the default setting AUTO is available for the S-Prg
mode except for the Movie mode. For the P and A/S/M/ modes including
the Movie mode, the change in one shooting mode is forcibly applied to
other shooting modes including the Movie mode.
AUTO
100, 200 or 400 is available.
100
Any of the 4 ISO sensitivities
are available.
AUTO
A
S
M
To Next Page
Loading...
Need help?
General
