126
Chapter 6
Sharpness
This function adjusts the sharpness of images.
In the top menu, select MODE MENU T PICTURE T SHARPNESS, then
press í.
Sharpness can be adjusted between +5 and –5 using
Ññ.
Press after selecting the desired value to complete the setting. To start
shooting, press again.
The outlines of images are more emphasized, and the
images themselves look more vivid, making this ideal
for printing.
The outlines of images are softer, making this ideal for
editing the images on a computer.
Factory default setting
● When adjusted too much towards +, noise may appear.
Setting limitations and Default settings (Sharpness)
Sharpness can be adjusted within the range of5 to 5 for all the shooting
modes. The default setting is 0 for all the shooting modes. The shooting
modes are classified into the following two groups in which the members
share the same setting with each other. If the setting is changed in one of the
members of a group, the changed setting is forcibly applied to the other
members of the group.
S-Prg ( Portrait, Sports, Landscape, Night-scene and
Movie modes), P and A/S/M shooting modes
Group 1
shooting mode
Group 2
To Next Page
Loading...
Need help?
General
