153
Chapter 8
All Reset
This function lets you choose whether or not the camera saves its current
settings. The settings that All Reset affects are listed below in additon to
those listed on P. 157.
1
In the top menu, select MODE MENU
T SETUP T ALL RESET.
● The ALL RESET setting screen appears.
2
Select OFF or ON, then press .
● As in All Reset, all modes including the (playback) mode share the same
setting with each other. If the setting is changed in one mode, the changed
setting is forcibly applied to the other modes including the (playback)
mode. However, with some modes such as S-Prg, the default setting stay
unchanged even if All Reset is set to OFF.
ALL RESET setting screen
Setting Factory default setting
LCD* OFF
S-Prg (P. 67)
Movie record mode (P. 115) HQ
* This sets the Monitor’s ON/OFF when the camera is turned on. Switching
between ON and OFF is available only in the P mode. For the S-Prg and
A/S/M/ modes, LCD is always set to ON.
OFF
The settings just before the power is turned off are saved.
ON
The factory default settings come back when the power is turned off.
To Next Page
Loading...
Need help?
General
