154
Chapter 8
You can set the volume of the beep used for button operations or warnings to
OFF, LOW or HIGH. The factory default setting is LOW, but you can turn the
beep completely off.
1
In the top menu, select MODE MENU
T SETUP T .
● The beep setting screen appears.
2
Select OFF, LOW, or HIGH, then press .
Beep setting screen
Rec View
You can choose if the image being recorded is displayed on the monitor
during shooting.
ON
The image being recorded onto the card is displayed on the monitor. This is
useful for a brief check of images you have just taken. Pressing the shutter
button halfway at any time displays the image the camera is currently aimed at.
OFF
The image being recorded onto the card is not displayed. If you shoot while
using the monitor, the subject the camera is pointing at will be displayed. This
is useful when you want to prepare your next shot while the previous image is
being recorded.
In the top menu, select MODE MENU T SETUP T REC VIEW T ON or
OFF.
● If you shoot with the monitor off and battery power is too low, Rec View is
not available.
Beep
To Next Page
Loading...
Need help?
General
