82
Chapter 4
1
Press the (monitor) button to turn on the monitor.
● In the S-Prg and A/S/M/ modes, the monitor turns on automatically.
2
Point the camera towards a subject while viewing through the
monitor. Place the subject on the AF target mark.
3
Press the shutter button halfway.
● When focus and exposure (brightness) are locked, the green lamp lights.
● If the orange lamp lights, the flash fires automatically.
T See “Flash shooting” (P. 92).
4
Press the shutter button all the way.
● The bottom of the memory gauge lights, the card access lamp blinks, and
the camera begins storing pictures on the card.
Number of storable
pictures
Card access lamp
Taking still pictures (Cont.)
AF target mark
Viewfinder
Orange lamp
Green lamp
Memory gauge
To Next Page
Loading...
Need help?
General
