22
Battery/card basics
1
Getting started
Removing the card
Push the card all the way in to unlock it,
then let it return slowly.
• The card is ejected a short way and then stops.
Hold the card straight and pull it out.
4 Close the battery compartment/card
cover in direction C and then slide it in
the direction shown D.
• Do not press on the card with hard or pointed items such as ballpoint
pens.
• Never open the battery compartment/card cover, or remove the card
or the battery while the camera is turned on. Doing so could destroy
the data stored on the card. Once destroyed, data cannot be
restored.
• Do not place a sticker or label on the card as this could prevent the
card from being ejected.
D
C
Releasing your finger quickly after pushing the card all the way in may
cause it to eject forcefully out of the slot.
Notes for removing the card
Note
To Next Page
Loading...
Need help?
General
