Body cap
Lens cap
Alignment mark (Red)
Lens release button
1
Remove the body cap from the camera and
the rear cap from the lens
2
Attach a lens to the camera
•
Make sure the
ON
/
OFF
switch is set
to OFF.
•
Do not press the lens release button.
3
Remove the lens cap (
3
,
4
)
Removing the lens from the
camera
While pressing the lens release button
(
1
), rotate the lens in the direction of the
arrow (
2
).
•
Align the lens attachment mark (red) on
the camera with the alignment mark (red)
on the lens, then insert the lens into the
camera’s body (
1
).
•
Rotate the lens in the direction indicated
by the arrow until you hear it click (
2
).
Rear cap
Lens attachment mark
(Red)
To Next Page
Loading...
