Olympus E-620 - Setting the Date;Time

15
EN
Basic guide
Setting the date/time
ENG.
W
s
’ -- . -- . --
--
: --
SETBACK
OFF
5SEC
c MENU DISPLAY
FIRMWARE
REC VIEW
j ±0 k ±0
Date and time information is recorded on the card together with
the images. The file name is also included with the date and time
information. Be sure to set the correct date and time before using
the camera.
CARD SETUP
NORM
CUSTOM RESET
PICTURE MODE
GRADATION
IMAGE ASPECT
SET
N
BACK
4:3
Y
Y/M/D
CANCEL
MD TIME
2009
Y
Y/M/D
CANCEL
MD TIME
2009 03 01 14 00
Y
Y/M/D
MD TIME
SET
CANCEL
2009 03 01 14 00
Y
Y/M/D
MD TIME
SET
CANCEL
SET
’09.03.01
14:01
BACK
ENG.
W
s
OFF
5SEC
c MENU DISPLAY
FIRMWARE
REC VIEW
j ±0 k ±0
1 Press the MENU button
2 Use fg to select [ d ], then
press i
3 Use fg to select [ X ], then
press i
4 Use fg to select [Y], then
press
i
5 Repeat this procedure until the
date and time are completely set
6 Use fg to select the date
format
7 Press the i button
8 Press the MENU button to exit
MENU button
• The time is displayed in the 24-hour format.
Arrow pad
fghi
• The menu screen is displayed on the
LCD monitor.
Preparations for shooting
E-620_MASTER.fm Seite 15 Dienstag, 17. Februar 2009 11:04 11