82
EN
6
Playback functions
6
Playback functions
The basic procedure for viewing pictures are as shown below.
However, before using any of these functions, follow Step 1 below. You can set the camera to
automatically switch to single-frame playback mode after shooting. g“REC VIEW” (P. 93)
1
Press the
q
button (Single-frame playback).
•
The last recorded image appears.
•
The LCD monitor turns off after more than 1 minute if no
operations are performed. The camera will turn off
automatically if there is no operation after 4 hours. Turn on
the camera again.
2
Use
p
to select images you want to view. You
can also turn the control dial to switch to
U
for
close-up playback.
Single-frame/Close-up playback
q
button
INFO
button
<
button
j
p
151515
[4032x3024,1/8][4032x3024,1/8]
2009.03.162009.03.16 21:5621:56
100-0015100-0015
1515
L
NN
Press
p
to change the
close-up position.
Press
p
to move the display
of the close-up position.
When
[
g
FACE DETECT]
(
g
P. 39) is set to
[ON]
, a
frame is displayed around a
detected face. Press
i
to
move the frame to another
face.
Press
hi
to view frame-by-
frame close-ups.
When
[
g
FACE DETECT]
is set to
[ON]
, press
fg
to move to another face in
close-up position.
• Press the INFO button to
return to close-up
playback.
(Single-frame playback) (Close-up playback)
Press the
INFO
button
f
: Displays the frame that is stored
10 frames back
g
: Displays the frame that is stored
10 frames ahead
i
: Displays the next frame
h
: Displays the previous frame
(Close-up position playback)
(Close-up frame-by-frame playback)
• To exit the playback mode, press the
q button again.
• Pressing the shutter button halfway
resumes the shooting mode.
Press the
<
button
• Plays back the image at a 10x
magnified close-up position.
U
G
Press the
INFO
button
E-620_MASTER.fm Seite 82 Dienstag, 17. Februar 2009 11:04 11
To Next Page
Loading...
