47
EN
Exposure
2
The picture looks blurred:
j
The use of a monopod or tripod is recommended when taking a picture at slow shutter speed.
j
When the shutter speed is slow, camera shake is more likely to occur. You can reduce camera
shake by using the image stabilizer.
g
“Image stabilizer” (P. 64)
To change the exposure adjustment interval:
j
This can be set in 1/3 EV, 1/2 EV or 1 EV increments.
g
“EV STEP” (P. 101)
To switch the operation between setting the shutter speed and aperture value:
j
You can set the aperture value using only the control dial.
g
“DIAL FUNCTION” (P. 96)
x
Notes
• Exposure compensation is not available in M mode.
Bulb shooting
You can take a picture with a bulb exposure time in which the shutter stays open as long as
you hold down the shutter button.
Bulb shooting can also be done using an optional remote control (RM-1). g“Bulb shooting
with the remote control” (P. 64)
In
M
mode, set the shutter speed to [BULB].
•
[buLb]
is displayed in the viewfinder and
[BULB]
on the super
control panel.
To automatically end bulb shooting after a specified period of time:
j
You can set the maximum time for bulb shooting.
g
“BULB TIMER” (P. 102)
To fix the focus during manual focus shooting:
j
You can fix the focus so the focus does not change even if the focus ring is turned during exposure.
g
“BULB FOCUSING” (P. 96)
x
Notes
• The following functions are not available during bulb shooting.
Sequential shooing/self-timer shooting/AE bracket shooting/image stabilizer/flash bracketing
The viewfinder shows the focused area (depth of field) with the selected aperture value.
For the preview function to work by pressing the < button, it is necessary to set the function
of the < button on the menu beforehand. g“; FUNCTION” (P. 97)
Press the
<
button to use the preview function.
•
When
[
;
FUNCTION]
is assigned to
[LIVE PREVIEW]
, pressing
the
<
button automatically switches the camera to live view for a
preview of the picture on the monitor.
TIPS
TIPS
Preview function
E-620_MASTER.fm Seite 47 Dienstag, 17. Februar 2009 11:04 11
To Next Page
Loading...
