Dust reduction function operation
The dust reduction function is automatically activated when the camera is turned on. Ultrasonic vibrations
are used to remove dust and dirt from the image pickup device’s filter surface. The SSWF (Super Sonic
Wave Filter) indicator blinks while dust reduction is working.
Adjust the viewfinder’s diopter in accordance
with your vision.
While looking through the viewfinder, rotate the
diopter adjustment dial little by little.
When you can see the AF target clearly,
adjustment is complete.
Adjusting the viewfinder’s
diopter
Viewfinder
Diopter adjustment dialAF target
•
To turn off the power, set the
ON
/
OFF
switch to
OFF
.
1
Set the camera’s
ON
/
OFF
switch to ON
2009. 03.16
INFO
button
Mode dial
Set the mode dial to
AUTO
.
SSWF indicator
ON
/
OFF
switch
When the camera is turned on, the
super control panel screen is displayed
on the monitor.
If the super control panel screen does
not appear, press the
INFO
button.
LCD monitor
Super control panel
To Next Page
Loading...
