41
EN
Using live view
1
You can check the effect of exposure compensation or white balance on a 4-split screen.
1
Press the INFO button repeatedly to display the
multi view display.
g
“Switching the information display” (P. 40)
•
The exposure compensation comparison screen is
displayed. Press
f
to switch to the white balance
comparison screen. Press
fg
to switch the screen.
2
Use
hi
or the control dial to select the setting
value, then press the
i
button.
•
You can take the picture using the set value.
x
Notes
• Exposure compensation is not available in M mode.
• This function cannot be used in g mode.
It is possible to enlarge the subject for display. Enlarging the image during MF makes focus
confirmation and adjustment easier.
1
Press the
INFO
button repeatedly to display the zoom display.
g
“Switching the information display” (P. 40)
•
The enlargement frame will be displayed.
2
Use
p
to move the frame and press the
i
button.
•
The area inside the frame is enlarged and displayed.
•
Press and hold the
i
button to return the enlargement frame to the center after it was moved.
3
Turn the control dial to change the magnification (5x/7x/10x).
•
Use
p
to scroll the frame even during magnification.
•
Pressing the
i
button will cancel the zoom display.
•
During zoom display, AF will not be activated even in the shutter button is pressed all the way.
You can take the picture after checking the focus in the zoom display.
Taking a picture while comparing the effect
Enlarged display operation
SETWB
/
F
+0.7+0.7 +1.0+1.0
0.00.0 +0.3+0.3
250
F5.6
38
E-620_MASTER.fm Seite 41 Dienstag, 17. Februar 2009 11:04 11
To Next Page
Loading...
