Olympus E-620 - Displaying the Custom Menu

23
EN
Basic guide
1 Press the MENU button to display the menu
2 Use fg to select the [ d ]
tab, then press i
3 Use fg to select [ c MENU DISPLAY], then press i
4 Use fg to select [ON], then press the i button
Displaying the Custom Menu
You can use the Custom Menu to customize the camera settings and operations to suit your
personal preferences. The Custom Menu is added when
[ c MENU DISPLAY] in the Setup
Menu is set to
[ON] .
For details of the Custom Menu, refer to “Customizing your camera” (
g P. 95)
SET
’09.03.01
14:01
BACK
ENG.
W
s
OFF
5SEC
c MENU DISPLAY
FIRMWARE
REC VIEW
j ±0 k ±0
ON
c MENU DISPLAY
SETBACK
SET
’09.03.01
14:01
BACK
ENG.
W
s
ON
5SEC
c MENU DISPLAY
FIRMWARE
REC VIEW
j ±0 k ±0
The [ c ] tab is displayed.
c Custom Menu:
Customizes shooting functions.
The settings on the Custom Menu are for customizing the camera to suit your personal
preferences or needs. They are not suited to frequent changing.
The initial menu is more than adequate for setting both simple and advanced shooting
functions. Normally, there is no need to display the Custom Menu.
i
Basic operations
E-620_MASTER.fm Seite 23 Dienstag, 17. Februar 2009 11:04 11