52
EN
2
Exposure
The higher the ISO value, the greater the camera’s light sensitivity and the better its ability to
shoot in low light conditions. However, higher values may give pictures a grainy appearance.
[AUTO]
: The sensitivity is set automatically according
to the shooting conditions. For
[ISO-AUTO
SET]
, you can set the default (value normally
used when the optimal exposure can be
obtained) and upper limit (upper limit of ISO
that automatically changes). g“ISO-AUTO
SET” (P. 102)
[100 – 3200]
: Fixed ISO sensitivity.
[ISO STEP]
can be
changed to
[1/3EV]
or
[1EV]
.
g“ISO STEP” (P. 101)
Setting display
•
125 and 1250 are displayed in the viewfinder as 120 and 1200, respectively.
Display after setting
To automatically set the optimal ISO in
M
mode:
j
Normally, the AUTO setting is not available in
M
mode, but you can set it for use in all shooting
modes.
g
“ISO-AUTO” (P. 102)
ISO sensitivity setting
Direct button
ISO
j
Super control panel
ip
: [ISO]
Menu
MENU
[
c
]
[
V
]
[ISO]
Viewfinder
AUTO :
100 :
3200 :
Viewfinder
When set to
[AUTO]
, ISO-A and the
ISO value determined by the camera
are displayed. For all other settings,
ISO and the set value are displayed.
When set to 2000 or a higher value,
ISO blinks.
TIPS
ISO
1600
100 200 400
800
SELECT SET
3200
ISO
button
i
button
j
MENU
button
When set to
[AUTO]
, the default
value is displayed.
E-620_MASTER.fm Seite 52 Dienstag, 17. Februar 2009 11:04 11
To Next Page
Loading...
